Ласты для плавания в бассейне Dolphin Monofin

Ласты для плавания в бассейне Dolphin MonofinЛасты для плавания<br>Training monofin - моноласта, которая разработана для обучения  технике толчков ногами Dolphin kick. Копируя движения дельфина с помощью моноласты, спортсмен может генерировать мощные волнообразные толчки, имитирующие удар хвоста дельфина в воде. При этом развивается чувство  равномерного усилия  при движении ногами вверх и вниз , а так же увеличивается выносливость и сила ног.<br><br>Размер RU: XS (35-36)<br>Цвет: ЧерныйЛасты для плавания
Training monofin - моноласта, которая разработана для обучения технике толчков ногами Dolphin kick. Копируя движения дельфина с помощью моноласты, спортсмен может генерировать мощные волнообразные толчки, имитирующие удар хвоста дельфина в воде. При этом развивается чувство равномерного усилия при движении ногами вверх и вниз , а так же увеличивается выносливость и сила ног.

Размер RU: XS (35-36)
Цвет: Черный

Подробнее >>>





Midseason Suit «Gorka 3» Black

Midseason Suit «Gorka 3» BlackВерхняя одежда<br>The costume consists of a jacket and pants.<br>Straight silhouette jacket with a center clasp closed on five inner horizontal hinges, three upper and one lower through hinges, with aliner on zip.<br>Double back with a yoke  has two vent holes in the stitching to the back area.<br>A flap on a yokewith two lower inclined recess pockets with valveswith a button and hole.Sacking of the pockets made of basic fabric and adjusted to the flap. A pocket for documents with a valve, fastened to the textile fastener inside the left flap.<br>Set-in sleeves, shirt type, single-seam, with overhead inclined pockets with valves, fastened to the textile fastener. Embroidered curly reinforcement patchin the area of the elbow.The bottom of the sleeves has detachable parts and is assembled on elastic band. Above the wrist area, the sleeves are assembled on the sowing with an elastic band. Sleeves under the armhole have ventilation holes in the form of four eyelets<br>The jacket is assembled onto elastic band on the waist line in the field of side seams.<br>The jacket has a hood, free-fitting neck and head, height-adjustable textile fastener in the nape area. The two-seam hood with a shaped edge in the form of a visor and can be pulled by a cord along the edge.<br>The bottom of the jacket is smoothly lengthened behind.A cord with a carbine is inserted into the sewn sowing in the bottom of the jacket.<br>From the finishing fabric (Oxford) in the jacket are made: yoke of flap and back, overhead pockets on the sleeves and pockets valves, inner pocket, reinforcement patchs on sleeves and detachable details of sleeves, sowing on sleeves and on the bottom of the jacket, middle part of hood.<br>Sleeveless removable liner fastens to a jacket on a zip braid.<br>On the side seams, the seams of the armholes and the yokethere is a double finishing stitch with a 0.2 cm wide and 0.7 cm from the seam or edge of the part.On the neck and valves of the pocket, a finishing stitchwith a 0.2 cm wide and 0.7 cm from the seam or edge of the part.  Along the edge of the bead, the seams of the hood, pads and pockets there is a finishing stitch with a 0.2 cm wide and 0.7 cm from the seam or edge of the part.<br>Pants suit straight with a one-piece belt, fastened to one horizontal loop and button, with an inner burr claspwith three loops and three buttons, with voluminous side patch pockets with valves fastened to the buttonhole and button.<br>Back halves of pants with patch pockets in reinforcing pads in the area of the middle seam, fastened to the buttonhole and button, and reinforcement pads in the area of the step joints.In the knee area, the back halves of the pants are gathered on the sowing with elastic braid.<br>The front halves of pants with side pockets in the seams and reinforcement pads in the knee area.<br>The belt is wide, assembled into two elastic bands and a cord between them. There are five loops on the belt of the trousers, two on the front halves, three on the back halves. Hinged loops for fastening braces sewn around the edge of the belt in the field of side seams. The set includes braces, that could be fastened to hinges and buttons.<br>The bottom of the trousers, below the knee level, has detachable parts and is assembled on elastic braid.Dusters sew nat the inner side.<br>From the finishing fabric (Oxford) atpants are executed: strengthening overlays on forward and back halves, burr, lateral pockets and valves of pockets, detachable details of trousers, a sowing on pants.<br>On the side, step and middle seams of pants, reinforcing strips of the back and front halves, loops a double finishing line is laid at a distance of 0.2 cm and 0.7 cm from the seam or edge of the part.<br>At the gate of the side pockets, a finishing line is placed 0.7 cm from the edge.<br>The costume is made of cloth tent (270g / m2) - 100% cotton; finishing fabric Oxford ripstop (600g / m2) - 100% polyester. Water -repellent impregnation(1500 mm Hg); fleece liner – 100% polyester.<br><br>Цвет: Черный<br>Размер: 50,  3<br>Пол: МужчинамВерхняя одежда
The costume consists of a jacket and pants.
Straight silhouette jacket with a center clasp closed on five inner horizontal hinges, three upper and one lower through hinges, with aliner on zip.
Double back with a yoke has two vent holes in the stitching to the back area.
A flap on a yokewith two lower inclined recess pockets with valveswith a button and hole.Sacking of the pockets made of basic fabric and adjusted to the flap. A pocket for documents with a valve, fastened to the textile fastener inside the left flap.
Set-in sleeves, shirt type, single-seam, with overhead inclined pockets with valves, fastened to the textile fastener. Embroidered curly reinforcement patchin the area of the elbow.The bottom of the sleeves has detachable parts and is assembled on elastic band. Above the wrist area, the sleeves are assembled on the sowing with an elastic band. Sleeves under the armhole have ventilation holes in the form of four eyelets
The jacket is assembled onto elastic band on the waist line in the field of side seams.
The jacket has a hood, free-fitting neck and head, height-adjustable textile fastener in the nape area. The two-seam hood with a shaped edge in the form of a visor and can be pulled by a cord along the edge.
The bottom of the jacket is smoothly lengthened behind.A cord with a carbine is inserted into the sewn sowing in the bottom of the jacket.
From the finishing fabric (Oxford) in the jacket are made: yoke of flap and back, overhead pockets on the sleeves and pockets valves, inner pocket, reinforcement patchs on sleeves and detachable details of sleeves, sowing on sleeves and on the bottom of the jacket, middle part of hood.
Sleeveless removable liner fastens to a jacket on a zip braid.
On the side seams, the seams of the armholes and the yokethere is a double finishing stitch with a 0.2 cm wide and 0.7 cm from the seam or edge of the part.On the neck and valves of the pocket, a finishing stitchwith a 0.2 cm wide and 0.7 cm from the seam or edge of the part. Along the edge of the bead, the seams of the hood, pads and pockets there is a finishing stitch with a 0.2 cm wide and 0.7 cm from the seam or edge of the part.
Pants suit straight with a one-piece belt, fastened to one horizontal loop and button, with an inner burr claspwith three loops and three buttons, with voluminous side patch pockets with valves fastened to the buttonhole and button.
Back halves of pants with patch pockets in reinforcing pads in the area of the middle seam, fastened to the buttonhole and button, and reinforcement pads in the area of the step joints.In the knee area, the back halves of the pants are gathered on the sowing with elastic braid.
The front halves of pants with side pockets in the seams and reinforcement pads in the knee area.
The belt is wide, assembled into two elastic bands and a cord between them. There are five loops on the belt of the trousers, two on the front halves, three on the back halves. Hinged loops for fastening braces sewn around the edge of the belt in the field of side seams. The set includes braces, that could be fastened to hinges and buttons.
The bottom of the trousers, below the knee level, has detachable parts and is assembled on elastic braid.Dusters sew nat the inner side.
From the finishing fabric (Oxford) atpants are executed: strengthening overlays on forward and back halves, burr, lateral pockets and valves of pockets, detachable details of trousers, a sowing on pants.
On the side, step and middle seams of pants, reinforcing strips of the back and front halves, loops a double finishing line is laid at a distance of 0.2 cm and 0.7 cm from the seam or edge of the part.
At the gate of the side pockets, a finishing line is placed 0.7 cm from the edge.
The costume is made of cloth tent (270g / m2) - 100% cotton; finishing fabric Oxford ripstop (600g / m2) - 100% polyester. Water -repellent impregnation(1500 mm Hg); fleece liner – 100% polyester.

Цвет: Черный
Размер: 50, 3
Пол: Мужчинам

Подробнее >>>